Antinsky x Ecovate 3D Beverly Pink Plate

UPDATE: We have added Snapmaker U1 270x270 Plates! Their estimated delivery is expected to be in May, not April

This limited edition pink plate is a collaboration between Antinsky and Ecovate 3D's own Beverly Tan! Beverly's words: "I really love matte filament, but it drove me crazy that the surface finish never matched the base plate." So she went and built the plate she always wanted: smooth matte finish, designed by a maker, for makers.

The pink isn't just pretty either. It represents Beverly's passion for championing women in STEM, and that high-contrast color makes inspecting your first layer genuinely easy.

After nearly a year of development, these are finally on their way to our shelves and expected in April. Pre-orders are 15% off now!

• Run your bed at a fraction of the heat. This is a true cold plate. For PLA, PETG, and TPU you only need 30–40°C for your first layer, then you can drop it to near zero for the rest of the print. Your heated bed is barely working, which means lower power draw and less thermal stress on your printer over time.
• No adhesion aids needed. No glue stick, no hairspray, no spray adhesive. Just wipe it down with a dry lint-free cloth before each print and you're good to go.
• Parts pop right off when it cools. Once the bed drops below 30°C, the natural difference in how PEI and your filament shrink does all the work. Just flex the plate and your print falls right into your hands.
• Thick steel keeps everything flat. The 0.5mm magnetic stainless steel base stays firmly seated on your bed even during long prints, which helps prevent the edge lifting and warping that can ruin large models.
• Great for PLA, PETG, and TPU. Not for ABS. The low-temp design is what makes this plate work so well, but ABS needs high bed temps that will shorten the plate's life. Stick to PLA, PETG, and TPU for best results.
• Built for Bambu Lab printers. At 257.5 x 257.5mm, this plate fits the A1, X1, P1P, P1S, and X1C. Double-check your model before ordering, and re-level your bed after swapping it in.